CR10V3-BL-Touch 3D Printer

Start-Gcode

M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate

G28 ;Home
G29 ;BL Touch Auto Bed Leveling
;M140 S{material_bed_temperature} ;set Bed Temperature
;M190 S{material_bed_temperature} ;Wait for bed to come to temp
;M420 S1 ;Load Mesh Bed Level
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X12.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X12.4 Y100 Z0.28 F1500.0 E30 ;Draw the second line

G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up

End-Gcode

G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning

G1 X0 Y{machine_depth} ;Present print
;G1 E-10 F500 ; Feed filament back 10mm(G1 E10 F500 Feed in 10mm)
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed

M84 X Y E ;Disable all steppers but Z